Andrew Chainless
If your Danby Kegerator’s compressor won’t turn on, you may be dealing with an issue of either the wiring or the functional components. This guide will cover the steps needed to diagnose and fix this common problem.
Danby Kegerator
The Danby Kegerator is a popular home keg refrigerator designed to store, chill, and dispense beer. It has an internal compressor system that keeps the beer at the perfect temperature throughout the day.
Common Problems Danby Kegerator Compressor Won’t Turn On
The most common problem with the Danby Kegerator is that the compressor won’t turn on. This can be caused by a variety of issues ranging from faulty wiring to malfunctioning functional components.
Diagnosing and Fixing the Problem
Before attempting any repairs, it’s important to identify the root cause of the issue. To do this, you’ll first want to check for any visible damage or faulty wiring in your kegerator. If none are present, then you’ll want to move onto diagnosing and fixing other potential causes such as:
- Defective Compressor Motor: The compressor motor may need to be replaced if it is defective. This can often be fixed by replacing the motor with a spare part.
- Low Refrigerant: If the kegerator is running low on refrigerant, it can cause the compressor to not turn on. This problem can be solved by topping off the refrigerant levels and recharging the system.
- Thermostat Malfunction: The thermostat may need to be replaced if it has become faulty or damaged over time. Once replaced, the compressor should start working again.
- Power Issues: Make sure that your kegerator is properly plugged in and that all electrical connections are secure and functioning correctly.
- Dirty Coils: Dirty coils can prevent proper air flow and reduce the efficiency of the compressor. Clean the coils regularly to ensure adequate cooling.
- Bad Capacitor: The capacitor is responsible for providing the necessary power to the motor. If it’s faulty, the motor won’t be able to turn on. Check the capacitor and replace it if necessary.
How to fix it
Step One: Check Electrical Wiring & Connections
The first thing to check if your Danby Kegerator’s compressor won’t turn on is the electrical wiring and connections. Make sure all of the wires are properly connected from your outlet to the power cord and then into the unit itself. If any are loose or damaged, they need to be replaced.
Also, check the circuit breaker to make sure it hasn’t tripped. If it has, reset it and try running the kegerator again.
Step Two: Check Functional Components
Once you’ve checked the wiring and connections, you’ll want to look into possible functional problems with your Danby Kegerator’s compressor. The most common issue is a broken thermostat switch – located on the back side of the unit near the compressor – which can cause the compressor not to turn on when needed.
If this is broken, replace it with an exact replica and ensure that all wiring is properly connected before turning the unit back on. You may also want to check the capacitor and any other components associated with the compressor system for signs of damage or wear.
Step Three: Troubleshoot Further
If you’ve gone through steps 1 & 2 and still cannot get your Danby Kegerator’s compressor to turn on, there may be a deeper issue at hand. At this point, it’s best to contact an experienced technician who can properly diagnose and fix the problem.
It’s important to note that fixing these issues will require opening up the unit – something professional technicians are trained in doing safely and correctly.
By following these steps and troubleshooting any issues you may have with your Danby Kegerator’s compressor, you’ll be able to get it working again in no time. Just remember to stay safe when opening up the unit and contact a professional technician if needed.
